Requires a free license for the Efinity^® software.
The Efinity^® software provides a complete tool flow from RTL design to bitstream generation, including synthesis, place-and-route, and timing analysis.

• Break-Out-Board with Programmer
• Break-Out to use it for your own boards
• There is still the option to continue to use the programmer in combination with the T*Square Education Board
• External R-C-circuitry allows implementation of ADCs and DACs in a digital FPGA, using LVDS-Buffers for sigma-delta-ADCs
• A UART allows communication with the RISC-V Sapphire Soft-Core that can be implemented in the FPGA Core fabric
• SPI-Flash (Config + RISC-V)
• 3 x PMOD interfaces allow attaching PMOD daughter cards
• Post connectors (included, but not mounted) can be mounted on the top or bottom of the T*Square education board to connect your own basedboards or daugther cards
• USB-C-Connector for Power Supply
• LVDS-Connector for Displays (J601)
• Power for Display-Backlight (J603)
• Interface for Touch-Controller
• 2 x QSE for daughter cards
• Interface for Raspberry-Pi Camera
• 256 Mbit Hyper-RAM
• 8-Bit DIP-Switch
• EMPOWER EP7143C (Rev. 1) or EP7145C (Rev. 2)

• T*Square Ti60-256 Education Board
• USB cable 2.0 > USB Mini Connector
• USB 2.0 Cable A Male to C Male 3.50' (1.00m)