The Titanium Ti375 N1156 Development Kit has everything you need to develop and prototype designs for Ti375 FPGA. This kit showcases the Ti375’s full-duplex transceivers supporting multiple protocols, hardened 1 GHz quad-core RISC-V block, hardened MIPI D-PHY up to 2.5 Gbps per lane, and best-in-class hardened LPDDR4/4x controllers.

• Efinix Ti375N1156C4 FPGA in a 1,156-ball FineLine BGA package
• Two 8 Gbit (32 Mbit x 16 DQ x 8 banks x 2 channels) LPDDR4 or LPDDR4x SDRAMs:
  • Supports x32 data width
  • Read/write speed up to 3.3 Gbps
• Two 512 Mbit SPI NOR flash memories:
  • Supports single, dual, and quad mode for each SPI flash
  • Supports x8 with both SPI flash devices in quad mode
• 8 GByte eMMC
• Four high-speed QSE connectors that support up to 8 channels (4 data lanes + 1 clock lane) TX/RX MIPI interfaces or LVDS/GPIO:
  • Two 1.5 Gbps TX/RX soft MIPI interfaces
  • Three 2.5 Gbps TX hard MIPI interfaces
  • Three 2.5 Gbps RX hard MIPI interfaces
• Four SFP+ receptacles for transceiver interface
• One PCIe edge card connector
• Gigabit Ethernet interface supporting RGMII standard and complies with 10Base-T, 100Base-TX, and 1000Base-T IEEE 802.3 standards
• Micro-SD card slot
• Two FPGA mezzanine cards (FMC) with high pin-count (HPC) connectors
• USB type-C connector to configure the development board
• 25, 33.33, 74.25, 100, and 156.25 MHz oscillators for Ti375 clock input
• Cooling fan
• Six User LEDs and two pushbutton switches
• Power:
  • 12.0 V power supply connector
  • On-board regulator sources: 0.85 V, 0.95 V, 1.1 V, 1.2 V, 1.8 V, 3.3 V, 5.0 V
• Power good and Ti375 configuration done LEDs

• Titanium Ti375 N1156 development board preloaded with a demonstration design
• USB type-C cable
• 12-V, 6.25-A universal power adapter with 5.5-mm DC jack converter
• Jumpers
• 4 screws and 4 standoffs
• Cooling fan and thermal pad