Tutorial video
» Description
With the development kit, you get a license for the Efinity® software with 1 year of upgrades.
The Efinity software provides a complete tool flow from RTL design to bitstream generation, including synthesis, place-and-route, debugging, and timing analysis.
» Features
- Efinix Ti180J484C4 FPGA in a 484-ball FineLine BGA package
- 8 Gbit (256 Mbit x 16 x 2 channels) LPDDR4 or LPDDR4x SDRAM:
- Supports x32 data width
- Read/write speed up to 3.0 Gbit/s
- 2 x 256 Mbit SPI NOR flash memory
- Supports single, dual and quad modes for each SPI flash
- Supports x8 with both SPI flash memories in quad mode
- 4 x QSE connectors
- 2.5 Gbit/s Tx/RX hardened MIPI interfaces
- Micro SD card slot
- FPGA mezzanine card (FMC) with low pin count connection (LPC)
- USB Type C port for configuring the development board
- 25, 33.33, 50 and 74.25 MHz oscillators for Ti180 PLL input
- User LEDs and switches:
- 6 LEDs
- 2 pushbutton switches
- Power:
- 12V power supply connector
- On-board regulator sources: 0.62 V, 0.85 V, 0.95 V, 1.1 V, 1.2 V, 1.8 V, 3.3 V, 5.0 V
- Power good and Ti180 configuration done LEDs
» Scope of delivery
- Titanium Ti180 J484 development board preloaded with a demonstration design
- Raspberry Pi v2 camera module (with 15-pin flat cable)
- Dual Raspberry Pi camera connector daughter card
- 2 IMX477 camera connector daughter cards
- Coral camera connector daughter card
- FMC to QSE adapter card
- Daughter card with HDMI connector
- Ethernet connector daughter card
- MIPI and LVDS expansion daughter card
- 2 22-pin flat cables
- USB type C cable
- 12 V, 5 A universal power supply
- Heat sink
- 14 standoffs, 10 screws and 14 nuts
Standard lead time: 12 weeks
